ztouchztouch Laizhou Golden Voice Automobile Electrical Appliance Co.,Ltd!

ztouch

Your present location:News Center >> Industry News >> Two-tone electric car horn contact preload how to adjust?

News Center

ztouch

If you have any questions, please contact us!

24 hours service hotline:

0535-2301021

Online Message

Contact us

Font Size:big  middle  small

Two-tone electric car horn contact preload how to adjust?

Number of visits: Date:2014年2月7日 09:27

Electric size car horn sound through the speaker coil with current size. When the pre- contact pressure, the current flow through the speaker coil increases, the volume of the horn is increased , whereas the volume is reduced.

Contact pressure is normal , horn work by examining current and rated current to determine whether the match . If the operating current is equal to the rated current , then the contact pressure is normal ; such as operating current is greater than or less than the rated current , then the contact pressure is too large or too small , should be adjusted .

For cylindrical , spiral -shaped electric car horn , barium should loosen nut , then turn the adjusting nut ( counterclockwise rotation , the contact pressure increases, the volume increase ) to adjust ; to basin -shaped electric horn can be rotated volume adjustment screw ( counterclockwise rotation , the volume increases) to be adjusted. Adjustment can not be too hasty , generally every turn the adjusting nut more than 1 / 10 laps .

Electric speaker volume and sound quality adjustment is not completely independent, both of them are actually interrelated, so both will need repeated testing to get the best results. Car horn sound level from the car in front of 2m, 1.2m from the ground at the time of measurement , its value should be 90-118dB (A).

TypeInfo: Industry News

Keywords for the information:

ztouch

Pay attention to us!

Manager Laizhou Golden Voice Automobile Electrical Appliance Co.,Ltd      鲁ICP备05024499号      Powered by 300.cn